Go to Top

Archives

Shaking Incubators

link icon

  GFl Shaking Incubators, Model: 3031 Specifications and features Microprocessor-controlled temperature regulation, PID type. Excellent temperature constancy: ± 0.2 °C temporal at 40 °C. Optimum temperature distribution throughout the cabinet interior by fan circulation. Electronic monitoring of the temperature regulator triggers visual alarm in case of fault. The heating is switched off, the cause of the fault is reported in the LED display through error codes. Adjustable limits for over- Read More

GFL Single water stills

link icon

  GFL Water Still for single distillation, Model: 2001/2 Specifications and features Water Still for single distillation suitable for bench mounting. Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C (see “Technical Details”). Thermostatic low water cut-off. Economical energy consumption by distillation of the heated cooling water. Evaporator easily accessible for cleaning purposes . Destillate withdrawal through outlet at the condenser. CO2 degassing through outlet in Read More

Water Baths for fume hoods

link icon

  Water Bath for Fume Hoods Specifications and features Temperature control by tension thermostat. Protection of the heating element by over-temperature cut-out. The openings in the lid are covered by heat-resistant plastic 4-part ring sets. Bath interior, heating element, removable recessed lid and perforated floor cover above the heating element are made of stainless steel. Adjustable water level regulator available as a standard scope of supply. Four non-slip plastic feet Read More

Water Bath for evaporation

link icon

GFL Water Bath for Evaporation Specifications and features Temperature control by tension thermostat. Protection of the heating element by over-temperature cut-out. Removable square cover plate (W 265 mm x D 265 mm). 9-part ring set made of heat-resistant plastic. The diametre of the opening can be varied in approx. 20 mm steps. Heating element, bath interior, frame and perforated floor above the heating element are made of stainless steel. Corrosion Read More

Vibration Shaker

link icon

GFL Vibration Shaker Specifications and features Quiet vibration shaker with orbital motion, long-lasting. Very high vibration frequency at low shaking amplitude for best possible mixing, even in the smallest test vessels. Excellently applicable for continuous operation. Electronic speed control, stepless, with gentle start-up. Clearly laid out control panel for easy operation. An a.c. motor with overload protection drives the unit. Compact, low-wear counterbalanced drive mechanism. Constant speed independent of load. Read More

Tissue Float Bath

link icon

GFL Float Bath Specifications and features Very good temperature constancy of ± 0.5 °C. Exact temperature control guarantees evenly stretched cut tissues which are clearly visible in the bath. Careful drying of the cut tissues on the warmed rim of the bath. The low 100 mm height of the bath allows compfortable and safe working. Bath interior made of aluminium, black anodised. Housing made of aluminium, powder-coated. With temperature controller Read More

Thermolab

link icon

  GFL Thermolab   Specifications and features Quadrothermal shaking water bath with four separate, independently heatable basins. Microprocessor-controlled temperature regulation. Excellent temperature constancy: ± 0.1 °C temporal at 50 °C. Optimum temperature distribution throughout the whole bath interior. Digital temperature readout and setting via LED display, in steps of 0.1 °C. Soft touch keys with characteristic symbols. Electronic monitoring; in case of fault, cause is reported on display. Two independently Read More

Tube Rotating Shaker

link icon

  GFL Tube Rotating Shaker Specifications and features Dependable, long-lasting and maintenance-free rotator. Electronic speed control, stepless. Clearly laid out control panel for easy operation. Compact, low-wear counterbalanced drive mechanism. Removable axle for loading outside of the rotator. Alternative axle equipable with clamps of different sizes optionally available (without surcharge, on request). Axle and drip pan made of stainless steel. Housing made of electrolytically galvanised sheet steel, powder-coated. Applications Smooth Read More

Memmert climate chamber

link icon

  forced air circulation in working chamber adjustable from 10 to 100% in 10% steps no drying-up of the load caused by the cooling device due to separation of thermal jacket from interior adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays energy-saving use of CFC-free cooling/heating system (refrigerant R134a) highly efficient automatic defrosting system integral fault diagnostics for temperature, CO2 and humidity control 2 Pt100 sensors Class A Read More

Memmert oven

link icon

forced air circulation by quite air turbine, adjustable in 10% steps for each segment individually adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment individually vent connection with restrictor flap adaptive, fuzzy-supported multifunctional digital microprocessor PID-controller self-diagnostics for fault analysis 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value digital 7-day programme timer Read More