GFL Water Still for single distillation, Model: 2001/2
Specifications and features

Water Still for single distillation suitable for bench mounting.
Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C (see “Technical Details”).
Thermostatic low water cut-off.
Economical energy consumption by distillation of the heated cooling water.
Evaporator easily accessible for cleaning purposes .
Destillate withdrawal through outlet at the condenser.
CO2 degassing through outlet in the condenser.
Cooling water temperature indicated through a thermometer.
Heating element, evaporator and condenser made of stainless steel.
Outer housing made of electrolytically galvanised sheet steel, electrostatically powder coated with epoxy resin.
Cooling water in- and outlet 1/2″ (ø approx. 12.7 mm).
Hoses for water in- and outlet are available as accessory.

Applications

GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications.

Technical details

Capacity 2 l / h

Conductivity approx. 2.3 µs / cm at 25 °C *

Cooling water required approx. 20 l / h

Minimum water pressure 1 to 2 bar

Exterior dimensions
(W x D x H) 280 x 250 x 490 mm

Electrical connection 230 V / 50…60 Hz / 2.0 kW **

Net weight approx. 7.5 kgs

Gross weight
(cardboard box) approx. 10.0 kgs

Gross weight
(wooden case) approx. 22.0 kgs

Packing volume approx. 0.10 m3

* Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.